Lime-Yellow Transfer Film 2″ JENNIS

Description: #8787 2″ Lime/Yellow Transfer Iron On Trim. Scotchlite Reflective Transfer Film is composed of wide-angle, exposed retroreflective lenses bonded to a heat-activated polyester adhesive.

Abrasion:  5000 Cycles

Appearance:  Daytime Color: Fluorescent lime/yellow Reflected Color: White

Application: recommended lamination temperatures. Application to fabrics: 1. Remove the plastic liner, exposing the dry adhesive (do not remove the paper carrier). 2. Place on a substrate with adhesive side down, apply heat 325-375 F (163-190 C) and pressure, with dwell time of 10-20 seconds and pressure. 3. Allow the application to cool before removing the paper carrier. For best results, apply to light and medium weight fabrics. Application on fabrics is best achieved over a flat surface where uniform heat and pressure can be applied. Avoid applying over seams. Cutting: Die-cutting is recommended, although film can also be hand-cut, guillotined, kiss-cut or plotter cut. NOTE: Whenever two or more pieces of any fabric are used together on a single surface or as a set, they should be matched to assure uniform day color and nighttime reflectivity. NOTE: The protective white paper liner should not be used as the carrier when applying plotter cut and weeded images: the exposed liner may adhere to certain fabrics at recommended lamination temperatures. Application to fabrics: 1. Remove the plastic liner, exposing the dry adhesive (do not remove the paper carrier). 2. Place on a substrate with adhesive side down, apply heat 325-375 F (163-190 C) and pressure, with dwell time of 10-20 seconds and pressure. 3. Allow the application to cool before removing the package.

Care:  Care guidance, in order of preference: For best retention of brightness 1. Wash: Machine wash warm, 40 C (105 F) 2. Bleach: Only non-chlorine bleach when needed. Dry: Tumble dry low Iron: Use cool iron, 110 C (230 F) Dry Clean: Dry-clean, normal cycle. NOTE: Repeated dry cleaning may cause slight stiffening, but the reflectivity will not be affected.

Cautions: Handling precautions for Hot and Humid Environments: Scotchlite silver transfer film contains an aluminum layer as part of its construction. Blemishing of this aluminum layer can occur if the paper carrier is removed and the front surface of the product has direct contact from hands during application and is then exposed to hot and humid conditions, greater than 80 degrees F and greater than 70% relative humidity, for a period of weeks. These blemishes do not affect the performance of the product. While the use of Scotchlite reflective material does greatly enhance visibility, no reflective material can guarantee absolute visibility, particularly in adverse weather conditions.

Features:  Very good stretch properties. Provide a high attention value when visibility is poor, especially at night. The film will provide attention value when visibility is poor, especially at night. The fluorescent colour is especially conspicuous under daytime conditions. It will remain highly reflective when viewed at wide entrance angles. The effective performance life of the film is such that it should retain good day colour and nighttime reflectivity for the life of the garment to which it is applied. Cold Fold: -20 C.

Product Contains:  Retroreflective lenses bonded to a heat-activated polyester adhesive.

Roll Size: 109 yards (100m)

Shelf Life:  Use within one year after date of receipt

Storage:  Store in a cool dry place. Rolls should be stored on a rod or pipe through the core. Cut sheets may be stored flat.

Uses: Safety vests, harnesses, uniforms, jackets, outerwear, armbands, and straps/belts.

Unit of Measure: One roll (109 yards per roll) – SOLD PER YARD